| Compresores y accesoriosAir CompressorsColumn flag cranesJib cranes and hoistFlag cranesLifting and transporting usedLifting cranesTrimming machines roud formsMachines under liquidationAir dryers, water chillers, air line filters, air conditiningMachine for plasticNew machine toolsCircular shearing machineConveyors scrapCurvaprofili and tubesDrilling capacity from 40 to 60 mmsFeeders for plateHydraulic Press BrakesMatrix sharp grinding machineMillingMotor opereted border machineMotorized bender machinesPresses for packagingSanders - BlastingSemiautomatic saw machinesShears for sheet metalSlotters strokes 125 - 200 - 300 - 350 mmSteel plate bending machinesTangential grindingTemperingUniversal IW seriesUniversal lathe high centres from 125 to 190 mmPipes bending - steel profile bending machinesManual pipes bending machinesThree axis cnc pipes bending machinesSandblasting machines - Hydro blastingSecond hand machinesPackaging usedSecond hands machineSelf centering chucksAll the safetiesChuck three-, four-jaw chuck and plateauTools post turret models m,a,b,c,d,e.Vices and machine-Wheels, air line filters, chains, etc..Spare Parts for MachinesTools machine and air compressors spare partsSpecial offersBoring machine mobile uprightSpecial offersUniversal lathe high centres from 290 to 400 mmUsed cantileversVarius occasionsSteel plate feeder for laser cutting machineYaskawa and Fanuc Used Spares PartsUniversal lathe high centres from 210 to 250 mmCooling liquid "chillers"Milling drilling machinesUniversal lathe high centres from 420 to 840 mmFoot carrelOmera Trimming and beading machineUniversal lathes high centres from 420 to 1200 mm length till 16000 mms |
Pneumatic Feeders ANP 310÷510Click for a full size photo
Models ANP 310÷510
.
.
Model ANP 310 nominal thickness 3,8 mm, width 310 mm
.
. Model ANP 410 nominal thickness 3,3 mm, width 410 mm
. Model ANP 510 nominal thickness 3 mm, width 510 mm
. Non binding dimensions of encumbrance for feeders ANP 70 width from 310 to 510
Measures related to the encumbrance
Devices accessories for Pneumatic Feeders
Plant for pneumatic feeder to draught (for short passages)
Code: 05.001.0001
.
Plant for pneumatic feeder to draught and reversing push (for short passages)
Code: 05.001.0002
.
Plant for pneumatic feeder in single and continuous cycle with microinterruttore of consent (for long passages)
Code: 05.001.0003
.
Electric departure with elettrovalvola
24 Vac 50-60Hz
110 Vac 50-60Hz
220 Vac 50-60Hz
24Vdc
Code: 05.001.0004
.
Pneumatic device for dice with pilot
It serves to open the fixed vice during the centratura of the pilots
Code: 05.001.0005
.
Device pilot to electric command
24 Vac 50-60Hz
110 Vac 50-60Hz
220 Vac 50-60Hz
24Vdc
Code: 05.001.0011
.
Additional device for footstep from 0.5 mm
Reduces the run least standard to 0.5 mm (for all the produced models)
Code: 05.001.0012
.
Remote control framework
Only for models ANP Standard cable length 5 meter Code: 05.001.0013
.
Hydraulic Deceleratore of end run
Code: 05.001.0014
|
